Cart 0

PowerEdge R430 Supported Drives

Internal drive bay and hot-plug backplane:
Up to 8 x 2.5” HDD: SAS, SATA, Near-line SAS SSD: SAS, SATA
Up to 4 x 3.5” HDD: SAS, SATA, Near-line SAS SSD: SAS, SATA

Up to 10 x 2.5" hot-plug drives in 10 bay chassis
Up to 4 x 3.5" cabled drives in 4 bay non-hot-plug chassis 

Datasheet: R430 spec sheet 

Manual: R430 manual

PER430
3.84TB MLC SAS 12Gbps 3.5" Hybrid SSD

Refurbished: 3.84TB MLC SAS 12Gb/s 3.5" Hybrid SSD for Dell PowerEdge Servers | Enterprise Drive in 13G Tray
3.84TB MLC SAS 12Gbps 2.5 SSD

Refurbished: 3.84TB MLC SAS 12Gb/s 2.5" SSD for Dell PowerEdge Servers | Enterprise Drive in 13G Tray

R430 Disk Sample Configurations

Chassis TypeSample Disk Configurations
3.5in Bays

2x 3.5" Hybrid SAS SSD

2x 3.5" SAS HDD

3.5in Bays

1x 3.5" Hybrid SAS SSD

3x 3.5" SAS HDD

2.5in Bays8x 2.5" SAS HDD
2.5in Bays

4x 2.5" SAS SSD

4x 2.5" SAS HDD

 

 

Note: PERC H330, PERC H730, or PERC H730P is required for SAS interface functionality. Otherwise, separate HBA or RAID controller is needed. PERC S130 only supports the SATA interface. For non-RAID mode, disk must be initialized via lifecycle controller before use, i.e. RAID 0 each disk as single RAID group